BOSCH F_FPP5000TI13 Communication interface
- SKU FPP-5000-TI13
- Categoria CCTV Industrial > Incendio > Módulos
BOSCH FPP5000TI13 Communication interface
FPP-5000-TI13 LSN communication interface for FPP-5000
FPP-5000-TI13
The module is an extension to the external power supply kit. It is the communication interface between the kit and the control panel.
Features
- Extends FPP-5000 functionality
- Line monitoring of all voltage outputs according to EN 54-13
- Fault detection with distinction, diagnosis and transmission to the control panel
- Programmable voltage outputs
System Overview
System Overview
Basic functions
The FPP-5000-TI13 LSN communication interface is an extension for the FPP-5000 external power supply kit only. It is the interface between FPP-5000 and the control panel, to which it transmits the following faults:
- Mains failure
- Battery failure
- Battery internal resistance failure
- BCM-0000-B battery controller module failure
- 24 V outputs short-circuited
- Earth fault
In addition, with the FSP-5000-RPS programming software, the switching outputs can be programmed and the line control settings adjusted according to EN54-13.
The module is connected next to the BCM-0000-B on the short control panel rail PRS-0002-C and receives power from the control panel rail via the module bus (MOB).
The front of the module has 4 LEDs indicating operating status and faults.
Certificates and approvals
Certificates and approvals
Included parts
Included parts
Planning
Please note that to comply with EN 54-2, the maximum of FPP-5000-TI13 per LSN loop is 10.
Key specifications
IP rating: IP20
Color: Grey
Dimensions (H x W x D) (mm): 96 x 127 x 60 mm
Material: Plastic
Weight (g): 154 g
Storage temperature (°C): -20 – 85 °C
Operating temperature (°C): -5 – 50 °C
Input voltage (VDC): 15 – 33 VDC
FPP-5000-TI13 LSN communication interface for FPP-5000
FPP-5000-TI13
Download datasheets/manuals
BOSCH FPP5000TI13 Communication interface
FPP-5000-TI13 LSN communication interface for FPP-5000
FPP-5000-TI13
The module is an extension to the external power supply kit. It is the communication interface between the kit and the control panel.
Features
- Extends FPP-5000 functionality
- Line monitoring of all voltage outputs according to EN 54-13
- Fault detection with distinction, diagnosis and transmission to the control panel
- Programmable voltage outputs
System Overview
System Overview
Basic functions
The FPP-5000-TI13 LSN communication interface is an extension for the FPP-5000 external power supply kit only. It is the interface between FPP-5000 and the control panel, to which it transmits the following faults:
- Mains failure
- Battery failure
- Battery internal resistance failure
- BCM-0000-B battery controller module failure
- 24 V outputs short-circuited
- Earth fault
In addition, with the FSP-5000-RPS programming software, the switching outputs can be programmed and the line control settings adjusted according to EN54-13.
The module is connected next to the BCM-0000-B on the short control panel rail PRS-0002-C and receives power from the control panel rail via the module bus (MOB).
The front of the module has 4 LEDs indicating operating status and faults.
Certificates and approvals
Certificates and approvals
Included parts
Included parts
Planning
Please note that to comply with EN 54-2, the maximum of FPP-5000-TI13 per LSN loop is 10.
Key specifications
IP rating: IP20
Color: Grey
Dimensions (H x W x D) (mm): 96 x 127 x 60 mm
Material: Plastic
Weight (g): 154 g
Storage temperature (°C): -20 – 85 °C
Operating temperature (°C): -5 – 50 °C
Input voltage (VDC): 15 – 33 VDC
FPP-5000-TI13 LSN communication interface for FPP-5000
FPP-5000-TI13
