COBERTURA DE HASTA 5 km / Amplificador de Señal Celular / Banda 5, 850 MHz / 20 Watts de Potencia / Banda Ancha Multioperador / Protección contra Autoexcitación / Monitoreo USB / Gabinete IP65.

Disponible: En Stock

SKU EP-OA0895-20W-V3
Modelo
Categoria Redes e IT > Cobertura para Celular 4G LTE, 3G y Voz > Amplificadores de Señal Celular (AdSC)

$ 60,399.28 MXN

Descripción

The EP-OA0895-20W-V3 Cell Signal Booster is a high-power solution designed to amplify cell signals in rural areas and open spaces outside urban development, offering coverage of up to 5 km from the installation point. With 20 Watts of maximum output power, this booster supports multiple carriers, technologies, and calls simultaneously, ensuring high performance and low noise thanks to its linear power amplifier. Additionally, it features automatic protection in case of self-excitation and a USB port for local monitoring.

Main Features

Amplifies cell signal in rural areas with coverage up to 5 km.
Maximum output power of 20 Watts.
Supports multiple carriers, technologies, and calls simultaneously.
Linear power amplifier for high performance and low noise.
Automatic protection in case of self-excitation.
USB port for local monitoring and supervision.
IP65 environmental protection rating.
Operating temperature range of -25~+55℃.

Technical Details

Specifications

Models: EP-OA0895-20W-V3 (B5, 850 MHz).
Maximum downlink power (DL): 43dBm ±1.5 dBm.
Maximum uplink power (UL): 33dBm ±1.5 dBm.
Maximum input power: 13 dBm.
Maximum gain: 95 ± 3 dB.
Gain adjustment range: ≥30 dB; 1 dB/step.
Automatic Gain Control (AGC) range: 30 dB.
IMD3: ≤ -45 dBc.
Out-of-band rejection: ≤ -10 dBc @ ± 2.5 MHz, ≤ -60 dBc @ ± 10 MHz.
Noise figure: ≤ 6 dB.
In-band ripple: ≤ 6 dB.
Delay time: ≤ 5 μs.
Spurious emission: 9 kHz – 1 GHz ≤ -36 dBm @ 30 kHz, 1 GHz – 12.75 GHz ≤ -30 dBm @ 100 kHz.
VSWR: ≤ 1.5.
RF connector impedance: 50 Ω.
Weight: ≤15 kg.
Dimensions: 428 × 328 × 175 mm.
Power consumption: ≤ 180 W.
Mean Time Between Failures (MTBF): ≥ 50,000 hours.

Interfaces and Connectivity

RF connectors: N-female.
USB port for local monitoring.
Power supply: Supports 110-220 V AC.

Applications and Use Cases

Rural Areas

Cell signal amplification in rural areas with low coverage.

Multi-carrier

Support for multiple cellular carriers and technologies.

Remote Monitoring

Local monitoring and supervision via USB port.

Descarga la ficha técnica aquí

Main Features

Amplifies cell signal in rural areas with coverage up to 5 km.
Maximum output power of 20 Watts.
Supports multiple carriers, technologies, and calls simultaneously.
Linear power amplifier for high performance and low noise.
Automatic protection in case of self-excitation.
USB port for local monitoring and supervision.
IP65 environmental protection rating.
Operating temperature range of -25~+55℃.

Technical Details

Specifications

Models: EP-OA0895-20W-V3 (B5, 850 MHz).
Maximum downlink power (DL): 43dBm ±1.5 dBm.
Maximum uplink power (UL): 33dBm ±1.5 dBm.
Maximum input power: 13 dBm.
Maximum gain: 95 ± 3 dB.
Gain adjustment range: ≥30 dB; 1 dB/step.
Automatic Gain Control (AGC) range: 30 dB.
IMD3: ≤ -45 dBc.
Out-of-band rejection: ≤ -10 dBc @ ± 2.5 MHz, ≤ -60 dBc @ ± 10 MHz.
Noise figure: ≤ 6 dB.
In-band ripple: ≤ 6 dB.
Delay time: ≤ 5 μs.
Spurious emission: 9 kHz – 1 GHz ≤ -36 dBm @ 30 kHz, 1 GHz – 12.75 GHz ≤ -30 dBm @ 100 kHz.
VSWR: ≤ 1.5.
RF connector impedance: 50 Ω.
Weight: ≤15 kg.
Dimensions: 428 × 328 × 175 mm.
Power consumption: ≤ 180 W.
Mean Time Between Failures (MTBF): ≥ 50,000 hours.