ABS Plastic Enclosure, IP66 Outdoor Use (170 x 220 x 110 mm) Stainless Steel Latch Closure and Allows for Padlock and Key Closure (5mm Bolt) Not Included
- SKU PST-1722-11E
- Categoria Redes e IT > Racks y Gabinetes > Gabinetes para Intemperie
ABS plastic enclosure for use in outdoor applications such as poles, telecommunications towers or walls where there is no protection against rain or excessive dust.
Physical characteristics
- Material: ABS plastic
- Door type: Solid type (NOT transparent)
- Compatible internal plate: PST-1722-11EPL (not included)
- Internal plate material: ABS plastic
- Protection level: IP66
- Dimensions: 170 x 220 x 110 mm (width x height x depth)
- Weight: 0.09 Kg
- Snap closure with option to install padlock (not included)
Includes
- Body and door
- Stainless steel snap closure
- Plastic hinges
- Gasket
Application
- POE's installation on tower, pole or wall
- Battery storage (breather recommended)
- Storage of surge protectors, fuses or electrical boards
- It is recommended to use gland-type connectors for cable output See models
Technical note: Fans can be implemented, but the holes must be drilled manually in the enclosure.
It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top. For this, it is recommended
to implement 2 PST-BC-V60 vents (not included) and it is necessary that at least one of them has a 60 x 60 mm fan. The recommended model is the following: FAN-602512 (not included).
Installing the above elements will reduce the enclosure's protection level (IP) but will improve heat dissipation.
ABS plastic enclosure for use in outdoor applications such as poles, telecommunications towers or walls where there is no protection against rain or excessive dust.
Physical characteristics
- Material: ABS plastic
- Door type: Solid type (NOT transparent)
- Compatible internal plate: PST-1722-11EPL (not included)
- Internal plate material: ABS plastic
- Protection level: IP66
- Dimensions: 170 x 220 x 110 mm (width x height x depth)
- Weight: 0.09 Kg
- Snap closure with option to install padlock (not included)
Includes
- Body and door
- Stainless steel snap closure
- Plastic hinges
- Gasket
Application
- POE's installation on tower, pole or wall
- Battery storage (breather recommended)
- Storage of surge protectors, fuses or electrical boards
- It is recommended to use gland-type connectors for cable output See models
Technical note: Fans can be implemented, but the holes must be drilled manually in the enclosure.
It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top. For this, it is recommended
to implement 2 PST-BC-V60 vents (not included) and it is necessary that at least one of them has a 60 x 60 mm fan. The recommended model is the following: FAN-602512 (not included).
Installing the above elements will reduce the enclosure's protection level (IP) but will improve heat dissipation.
