ABS Plastic Enclosure, Transparent Door, Outdoor Use IP66 (190 x 290 x 140 mm) Stainless Steel Latch Closure and Allows Padlock and Key Closure (5mm Bolt) Not Included
- SKU PST-1929-14ET
- Categoria Redes e IT > Racks y Gabinetes > Gabinetes para Intemperie
ABS plastic enclosure for outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical characteristics
- Material: ABS Plastic
- Door: Transparent, made of Polycarbonate
- Compatible internal plate: PST-1929-14EPL (not included)
- Protection level: IP66
- External dimensions: 190 x 290 x 140 mm (width x height x depth)
- Option for padlock installation (not included)
Includes
- Body and door
- Stainless steel latch closure
- Plastic hinges
- Gasket
Application
- Installation of POEs on towers, poles, or walls
- Battery storage (ventilation recommended)
- Protection for surge protectors, fuses, or electrical boards
- It is recommended to use gland-type connectors for cable output (See models)
Technical note
The implementation of fans is possible, however, the holes must be made manually in the enclosure.
It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended
the implementation of 2 vents model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is the following: FAN-602512 (Not included).
Installing the above elements will reduce the protection level (IP) of the enclosure but will improve heat dissipation.
ABS plastic enclosure for outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical characteristics
- Material: ABS Plastic
- Door: Transparent, made of Polycarbonate
- Compatible internal plate: PST-1929-14EPL (not included)
- Protection level: IP66
- External dimensions: 190 x 290 x 140 mm (width x height x depth)
- Option for padlock installation (not included)
Includes
- Body and door
- Stainless steel latch closure
- Plastic hinges
- Gasket
Application
- Installation of POEs on towers, poles, or walls
- Battery storage (ventilation recommended)
- Protection for surge protectors, fuses, or electrical boards
- It is recommended to use gland-type connectors for cable output (See models)
Technical note
The implementation of fans is possible, however, the holes must be made manually in the enclosure.
It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended
the implementation of 2 vents model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is the following: FAN-602512 (Not included).
Installing the above elements will reduce the protection level (IP) of the enclosure but will improve heat dissipation.
