Long Range RFID Reader for Vehicle Access Control / Adjustable Distance 3 - 12 m Linear Coverage / UHF 902-928MHz
- SKU PRO-12RF
- Categoria Control de Acceso > Acceso Vehicular > Accesorios
New Reader Version
VERSION2 (compatible only with EPCGEN2 protocol)
Description
Long Range RFID (UHF) Reader
Ideal for parking lots, residential complexes, corporate buildings and any vehicular access point.
Check how to configure your reader: HERE
Important Notes
- Distance may vary depending on site conditions and tag type.
- You should consider that other tags installed in the vehicle may interfere with reading, it is important to calibrate before installing.
- You should consider that in a typical installation you might require different types of tags according to the vehicle.
- ACCESSPRO readers and tags may not be compatible with other tags or readers from other brands.
- The most recent readers are second generation and are identified on the label with the legend Version2; these new readers can only read EPCGEN2. They no longer support ISO18000B.
- It is recommended to use a connection box to prevent splices and adhesives from being exposed outdoors. You can use the RFSOP and RFSOPT mounts that include a connection box.
- Only software supplied with the equipment or provided by SYSCOM is supported, provided that the same database engine included is used. Any other implementation to other software or another database version is the responsibility of the integrator or developer in charge.
Recommended Accessories
RFSOP Floor mount for PRO12RF
Configuration
Before installing, it is necessary to activate the antenna and configure it. Its default IP is 192.168.1.200. Please set the following values:
For compatibility with other existing systems, consult the Syscom Engineering department.
Warnings
- In case of Firmware updates, contact the Engineering department, as each antenna requires specific firmware and loading incorrect firmware can render the antenna unusable.
New Reader Version
VERSION2 (compatible only with EPCGEN2 protocol)
Description
Long Range RFID (UHF) Reader
Ideal for parking lots, residential complexes, corporate buildings and any vehicular access point.
Check how to configure your reader: HERE
Important Notes
- Distance may vary depending on site conditions and tag type.
- You should consider that other tags installed in the vehicle may interfere with reading, it is important to calibrate before installing.
- You should consider that in a typical installation you might require different types of tags according to the vehicle.
- ACCESSPRO readers and tags may not be compatible with other tags or readers from other brands.
- The most recent readers are second generation and are identified on the label with the legend Version2; these new readers can only read EPCGEN2. They no longer support ISO18000B.
- It is recommended to use a connection box to prevent splices and adhesives from being exposed outdoors. You can use the RFSOP and RFSOPT mounts that include a connection box.
- Only software supplied with the equipment or provided by SYSCOM is supported, provided that the same database engine included is used. Any other implementation to other software or another database version is the responsibility of the integrator or developer in charge.
Recommended Accessories
RFSOP Floor mount for PRO12RF
Configuration
Before installing, it is necessary to activate the antenna and configure it. Its default IP is 192.168.1.200. Please set the following values:
For compatibility with other existing systems, consult the Syscom Engineering department.
Documentation
Vehicular access control with UHF tags and AccessPro barriers
Warnings
- In case of Firmware updates, contact the Engineering department, as each antenna requires specific firmware and loading incorrect firmware can render the antenna unusable.
