Supresor de sobretensiones transitorias, para uso en corriente alterna de 125 a 300 Vca.
- SKU LA302R
- Categoria Energía / Herramientas > Calidad de la Energía > Supresor de Picos Vca
Electrical work is dangerous; faulty connections can cause fires, injuries, or death. Electrical installation should only be performed by qualified professionals.
When there is an electrical discharge in the power grid, the suppressor will take the damage. If the discharge is of greater intensity than indicated in the technical data sheet and has accumulated sufficient heat and voltage, the suppressor will open an approximately one-inch hole in the bottom of the canister and expel hot silicon and plastic pieces, performing its maximum blocking function and protecting the circuit.
Use this AC voltage surge restrictor before your inverter. This will prevent damage due to current surges caused by unexpected electrical discharges.
*Silicon Oxide Varistor
*Unlimited number of protections.
*Response time 5 nanoseconds
Connect the black wires to the thermal breakers, splicing them with the 2 phases that go to the inverter. Connect the white wire to neutral-ground.
You can also use it in a distribution panel for the protection of electronic equipment.
Electrical work is dangerous; faulty connections can cause fires, injuries, or death. Electrical installation should only be performed by qualified professionals.
When there is an electrical discharge in the power grid, the suppressor will take the damage. If the discharge is of greater intensity than indicated in the technical data sheet and has accumulated sufficient heat and voltage, the suppressor will open an approximately one-inch hole in the bottom of the canister and expel hot silicon and plastic pieces, performing its maximum blocking function and protecting the circuit.
Use this AC voltage surge restrictor before your inverter. This will prevent damage due to current surges caused by unexpected electrical discharges.
*Silicon Oxide Varistor
*Unlimited number of protections.
*Response time 5 nanoseconds
Connect the black wires to the thermal breakers, splicing them with the 2 phases that go to the inverter. Connect the white wire to neutral-ground.
You can also use it in a distribution panel for the protection of electronic equipment.
